Rigid Box Quality Control: What We Check Before Your Boxes Ship
Corner alignment, print registration, edge wrapping and magnet strength. See exactly what we inspect at every production stage — so your boxes arrive perfect. Chengtop Packaging’s QC guide.
- See the full QC checklist for rigid boxes
- Know what we check at each production stage
- Understand common defects and how we catch them
- Learn our sample approval process
- Know what to look for when you receive your boxes
- Avoid quality surprises in bulk production
اطلب عرض أسعار
أدخل الكمية التي تحتاجها وأضفها إلى قائمة عروض الأسعار الخاصة بك للاستفسار عن الأسعار.
الوصف
Quality Is Checked, Not Hoped For
A beautiful design on paper doesn’t always translate to a perfect box. Misaligned corners, off-color printing, loose magnets — these defects only show up in production. We check at every stage so you don’t find problems after delivery.
Our QC Stages
|
Stage
|
What We Check
|
When
|
|
Material inspection
|
Board thickness, paper color, print proof
|
Before cutting
|
|
Sample approval
|
Full sample checked by you
|
Before bulk
|
|
In-line QC
|
Print quality, die-cut accuracy
|
During production
|
|
Assembly QC
|
Corner alignment, glue, lid fit
|
After assembly
|
|
Final inspection
|
Full check, packing
|
Before shipping
|
What We Check: The Details
Corner Alignment
- All four corners meet at 90 degrees
- No gaps or overhang on corners
- Wrap paper folds cleanly around corners
- No bubbling or wrinkles at corners
جودة الطباعة
- Colors match approved Pantone swatches
- Print registration is precise (no misalignment)
- No smudges, scratches or ink marks
- Foil stamping is clean and sharp
Edge & Wrapping
- Wrap paper is smooth, no bubbles
- Edges are clean and straight
- No exposed greyboard on edges
- Edge painting (if ordered) is even and complete
Lid & Base Fit
- Lid fits snugly on base
- No wobble or loose fit
- Magnetic closure snaps shut properly
- Drawer slides smoothly
Common Defects We Catch
|
Defect
|
How We Catch It
|
|
Misaligned corners
|
Visual check + measurement
|
|
Off-color printing
|
Compare to Pantone swatch
|
|
Weak magnets
|
Open/close test 10 times
|
|
Loose lid fit
|
Lid drop test
|
|
Paper bubbles
|
Run finger over surface
|
|
Scratches on finish
|
Visual inspection under light
|
|
Glue marks
|
Visual check inside and out
|
|
Wrong dimensions
|
Measure with ruler
|
Sample Approval Process
قبل بدء الإنتاج بكميات كبيرة:
- We produce a pre-production sample
- We photograph it from all angles
- You review and approve (or request changes)
- Only after your approval do we start bulk
This catches design issues before thousands of boxes are made.
Our Acceptance Rate
- Print quality: 98% pass first check
- Corner alignment: 99% pass
- Magnet strength: 99.5% pass
- Overall: Under 2% defect rate in finished boxes
Any defective boxes are replaced before shipping. You pay for good boxes only.
What You Should Check When Boxes Arrive
- Open one carton — Inspect 3–5 random boxes
- Check corners — Are all four corners clean?
- Check printing — Does color match your sample?
- Open and close — Does the lid fit right?
- Check edges — No exposed board or wrapping issues?
- Report any issues — Within 7 days of delivery
Common QC Mistakes Buyers Make
- Skipping sample approval — First time seeing boxes is 1000 units
- Not checking color under right light — Colors look different under fluorescent vs natural light
- Ignoring minor defects — Small corner gap becomes 1000 boxes with corner gaps
- Not measuring dimensions — “Looks right” isn’t good enough
- No quality agreement — No clear standard for what’s acceptable
How We Ensure Quality
- Pre-production sample approved by you
- In-line QC at every production stage
- Final inspection before packing
- Under 2% defect rate target
- Defective boxes replaced free
Want To See Our QC Process?
We send you sample photos and progress updates throughout production. Contact us to learn more.
البريد الإلكتروني: chengtop888@outlook.com
واتساب / الهاتف: +86 15272060604
