{"id":6601,"date":"2026-11-18T22:59:24","date_gmt":"2026-11-18T14:59:24","guid":{"rendered":"https:\/\/www.chengtop1.com\/products\/foil-stamp-registration-small-thank-you-cards\/"},"modified":"2026-11-18T22:59:24","modified_gmt":"2026-11-18T14:59:24","slug":"foil-stamp-registration-small-thank-you-cards","status":"publish","type":"cxb_products","link":"https:\/\/www.chengtop1.com\/es\/products\/foil-stamp-registration-small-thank-you-cards\/","title":{"rendered":"Foil Stamp Registration on Small Thank You Cards"},"content":{"rendered":"<p>A thank you card leaves very little room for error. A foil mark a millimetre off centre reads clearly against a narrow margin, and a small card gives the eye a fixed frame to judge it by. Registration on a thick uncoated stock also behaves differently from registration on a coated carton, so a die that works on the box may not suit the card that sits inside it.<\/p>\n<h2>Margin and Mark Position<\/h2>\n<p>On a small card the margin is part of the design. A border, a blind deboss and a foil mark all compete for the same few millimetres, and the eye notices an unequal gap far more than it notices a slightly small logo. Set the mark from the trimmed card edge, not from the sheet layout, because trimming variation shows up as an off-centre mark.<\/p>\n<p>Keep the foil away from the very edge. A foil that runs to the trim can chip when the card is cut or handled, and a card placed in an insert recess gets rubbed along its edges every time the box is opened. A few millimetres of clear stock around the mark protects it.<\/p>\n<h2>Stock, Deboss and Foil Together<\/h2>\n<p>Uncoated board takes a blind deboss well because the fibres compress and hold the shape. Foil on the same stock needs a smooth enough surface to release cleanly, so a heavily textured sheet can give a broken edge to a fine mark. Where both finishes are used, stamp the deboss and the foil on the same sample and check that they line up under raking light.<\/p>\n<p>Foil temperature and dwell change with the stock. Too little heat leaves a patchy release; too much can scorch an uncoated sheet or push the foil into the deboss so the two details merge. Ask for a strike on the actual card stock rather than approving a proof on a coated sheet. The <a href=\"https:\/\/www.chengtop1.com\/es\/categoria-de-producto\/tarjetas-de-agradecimiento\/\">tarjetas de agradecimiento<\/a> range uses several board weights, and each one takes a stamp a little differently.<\/p>\n<h2>Insert Recess and Card Thickness<\/h2>\n<p>A card that sits in a shallow recess has to be thin enough to lie flat but stiff enough not to bow. A thick card with a deep deboss can ride proud of the recess and press against the lid lining. Check the card in the box with the tissue wrap in place, since the wrap adds height and changes where the card comes to rest.<\/p>\n<p>Where a <a href=\"https:\/\/www.chengtop1.com\/es\/categoria-de-producto\/prospectos\/\">insert<\/a> holds both the product and the card, set the recess depth from the finished card, including the foil build-up, rather than from the raw board caliper. A recess cut for a plain sample can leave a stamped card sitting high.<\/p>\n<h2>Colour and Batch Consistency<\/h2>\n<p>Cream and off-white boards vary between batches, and a gold foil that looked warm against one batch can read dull against the next. Approve the card beside the box lining under the same light, since the two are seen together at the moment the lid opens. Keep a signed sample from the run for comparison when a repeat order is placed.<\/p>\n<h2>Checks Before the Die Is Made<\/h2>\n<ul>\n<li>Set the mark position from the trimmed card edge, not from the sheet layout.<\/li>\n<li>Keep foil clear of the trim and of the edges rubbed by the insert recess.<\/li>\n<li>Stamp a strike on the actual card stock with the deboss in the same sample.<\/li>\n<li>Check the finished card in the box with the tissue wrap in place.<\/li>\n<li>Approve the foil colour beside the box lining under the same light.<\/li>\n<\/ul>\n<p>Send the card size, the board weight and the finish list when you ask for a quote. With the margin, the stamp and the recess settled together, the small detail reads the way it was drawn.<\/p>","protected":false},"excerpt":{"rendered":"<p>A thank you card leaves very little room for error: a foil mark a millimetre off centre reads clearly against a narrow margin. Set the mark from the trimmed card edge, keep foil clear of the trim, and strike a sample on the actual board with the deboss in place. Check the finished card in its insert recess with the tissue wrap at the height it will sit.<\/p>","protected":false},"featured_media":6587,"menu_order":0,"template":"","cxb_product_category":[32],"cxb_product_tag":[],"class_list":["post-6601","cxb_products","type-cxb_products","status-publish","has-post-thumbnail","hentry","cxb_product_category-thank-you-cards"],"_links":{"self":[{"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/cxb_products\/6601","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/cxb_products"}],"about":[{"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/types\/cxb_products"}],"version-history":[{"count":0,"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/cxb_products\/6601\/revisions"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/media\/6587"}],"wp:attachment":[{"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/media?parent=6601"}],"wp:term":[{"taxonomy":"cxb_product_category","embeddable":true,"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/cxb_product_category?post=6601"},{"taxonomy":"cxb_product_tag","embeddable":true,"href":"https:\/\/www.chengtop1.com\/es\/wp-json\/wp\/v2\/cxb_product_tag?post=6601"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}