What is a FEFCO code? It is a four-digit number from the common European standard for corrugated box constructions, used on drawings instead of a written description. The first two digits name the family – 02 for slotted boxes, 03 for trays and two-piece packs, 04 for folders and die-cut display units, 07 for glued ready-to-use cases. The last two digits identify the variant inside that family. On a purchase order it saves a paragraph of explanation and removes the chance that two people picture different boxes.
Why does 0201 turn up on almost every export carton? That is the regular slotted container, the workhorse of transport packing. Both top and bottom have two outer and two inner flaps, all the same depth, with the outer flaps meeting at the centre. It closes flat, stacks square on a pallet and runs fast on a flexo folder gluer. The construction is covered from the board side in the basics of corrugated boxes, flutes and strength.
When is 0203 worth the extra board? Code 0203 is the full-overlap version: the outer flaps run the full width of the box and overlap each other completely. That double layer across the top and bottom lifts compression strength and protects a load that does not fill the box. The trade-off is board consumption – roughly a fifth more than 0201 for the same footprint – so it earns its place on heavy or partly filled cartons, not on every order.
Which code covers a die-cut shelf display? The 04 series holds the die-cut units, including the five-panel display with a hinged lid and a tear-out front that supermarkets accept as shelf-ready. Because these are cut on a flatbed die rather than a slotter, tooling and make-ready cost more, and the run has to justify it. Retail display rules and the structural side are set out in the notes on packaging display design.
What do the 03 and 07 series solve? The 03 series covers trays, two-piece packs and shallow half-trays – useful for produce, large flat items and packs where the lid has to lift off. The 07 series is glued and delivered flat, opened in one movement, and often used where packing speed matters more than board cost. Neither is exotic; both are simply less common in general export work, so a supplier may need to check tooling availability before quoting.
How do you specify a style without sending a drawing? Quote the code, then state the internal dimensions, flute and board grade separately. The code says nothing about size, and this is the single most common misunderstanding on a first order: 0201 describes a construction, not a box. Add the load weight, the pallet pattern and whether the carton ships by sea, because those decide the grade rather than the style. The guide to reading structure drawings shows how the code sits alongside dimensions and crease lines.
Where should the code appear in the paperwork? Put it in the title block of the drawing, in the specification sheet and on the inspection record, so that the incoming check compares the same thing purchasing ordered. A factory that receives only a photo and a size will make a reasonable box that may not match the original. Adding four digits to the file costs nothing and prevents a reprint. Marking and carton identification on the outside are a separate subject, covered in the guide to shipping marks.
Chengtop produces corrugated shipping boxes, folding cartons and rigid gift boxes from our plant in Wuhan. If you have a FEFCO code but no drawing, send the code with your internal dimensions and load weight and we will confirm the construction and grade. Start from the quote request page.


