Void Pattern and Frangible Security Seals Compared
A void pattern leaves a readable mark on the box underneath, while a frangible film breaks into pieces instead of coming away whole. Both show that a package was opened, but they need different adhesive behaviour and look quite different on a textured wrap. Approve the opening result on a finished sample, and decide whether fibres pulling from the wrap count as evidence or damage.
Request a Quote
Enter the quantity you need and add to your quote list for pricing inquiries.
Description
A tamper-evident seal has to leave a result that a person can read without a microscope. A void pattern leaves a readable mark behind on the box, while a frangible film breaks into pieces instead of coming away whole. Both show that a package was opened, but they ask different things of the adhesive, the wrap and the person inspecting a returned unit. Approve the opening result on a finished sample, because a catalogue description will not tell you how the seal behaves on a textured wrap.
How a Void Pattern Behaves
A void layer sits between the hologram and the surface. When the seal is pulled, part of the pattern stays on the box and part goes with the film, so the word or grid appears in two places and cannot be reassembled neatly. That makes a strong visual signal on a smooth coated surface. On a textured or soft-touch wrap the release can be uneven, and the pattern may come away with fibres instead of leaving a clean mark.
Check the residue under ordinary light. A pattern that needs to be held at an angle to be seen is less useful at a returns desk. Where the box carries a foil logo nearby, keep the void area clear of the mark so the evidence does not compete with the brand detail. The holographic security stickers range covers stock and custom void patterns.
What Frangible Film Gives You
A frangible sticker breaks into small pieces rather than lifting as one piece. That makes it hard to remove and replace without leaving gaps, which suits a seal spanning a lid seam or a tuck flap. It is less dependent on the wrap surface than a void layer, so it can be a better fit for an uncoated or heavily textured board. The trade-off is that small fragments can stay on the package and look untidy on a display unit.
Both constructions need enough adhesive contact on either side of the seam. A seal placed mostly on a flat panel can still be lifted with care, whatever film it uses. Settle the seam position while the dieline is open, then choose the tamper layer that suits the wrap. The stickers and labels collection shows the facestock and adhesive pairings behind them.
Removal Damage and Returned Units
Decide deliberately whether the wrap losing fibres counts as evidence or as damage. On a gift box that may be inspected and restocked, a seal that tears the wrap creates a second problem. A frangible film with a lighter release can give a clear break without pulling the surface apart. Test removal after a day as well as straight away, since the bond keeps building and a seal that lifts cleanly on the bench can behave differently after a week in a warehouse.
Seal supply is worth treating as a controlled item. A stock pattern from a general catalogue can be bought by anyone else, so a custom void mark and a held number range make the record more useful. Agree who stores the artwork and who authorises a reprint, and check that the seal does not cover a required country-of-origin mark or a recycling symbol, since those panels are often the same narrow strip a seal wants to occupy.
Checks Before Approving a Run
- Apply the seal across the intended seam on the finished wrap, not on bare board.
- Open the package once and look for a clear pattern or a clean break.
- Try to close it again and judge whether it still looks untouched.
- Remove the seal after a day and note whether the wrap loses fibres.
- Confirm the seal does not cover a foil logo, batch code or required symbol.
Send the box structure, the wrap finish and how returns are handled when you ask for a quote. With the seam, the tamper layer and the release behaviour settled together, the seal gives a readable result without damaging the parts of the box that still need to look right.







