Screen Angles and Moire: Rosettes, Angles, Fixes

What causes a moire pattern? Two regular grids laid over each other at a shallow angle create a third, coarser pattern that the eye reads as a wavy texture. In print, the grids are halftone screens, and when cyan, magenta, black and yellow dots sit at angles too close together, the interference shows up as a rosette or as a visible band across a solid tint. The effect is a function of geometry, so it can be predicted and prevented rather than inspected out afterwards.

Which angles do printers use? The classic set separates the four screens by roughly thirty degrees: black at 45, magenta at 75, cyan at 15 and yellow at 0 in the European convention, with small variations between houses and regions. Yellow is placed at the angle where interference is least visible, because yellow dots carry little contrast against white paper. Black takes 45 degrees because that angle is the least noticeable to the human eye for a single screen.

Why does the angle set change with the process? Sheetfed offset on coated board can hold a fine ruling, and the angles are set for the dot shape and the ink sequence. Flexo printing on corrugated uses coarser rulings and a different geometry, because the plate and the anilox transfer ink differently and dots sit on a rougher surface. Where a job moves between processes, the angle set has to move with it, which is one reason a file prepared for offset does not simply drop into a flexo workflow.

What about stochastic screening? Frequency-modulated screening varies dot size and spacing randomly instead of using a fixed grid, which removes screen-angle interference by design. It holds fine detail and avoids rosettes, at the cost of a grainier look in flat tints and tighter requirements on plate and press condition. Hybrid screening keeps a conventional screen in the highlights and switches to randomised dots in the midtones, which suits packaging with both photographs and large solids.

Where else does moire come from? Not every pattern on a printed sheet is a screen clash. Scanning a previously printed piece reproduces its rosette as image content, fabric and woven textures interact with the halftone, and a corrugated flute under a laminated sheet can telegraph a regular wave. Fine repeating patterns in the artwork , a pinstripe, a mesh, a printed knit , can also beat against the screen and produce a visible band that no angle change fixes. Those need the artwork adjusted, not the press.

How do you check for it before printing? A loupe at ten times magnification shows the rosette directly, and a proof viewed at final size shows whether the pattern is visible at reading distance. Checking on screen at 100 percent tells almost nothing, because the monitor’s pixel grid is a third grid in the conversation. Where a job carries a large flat tint or a photograph with smooth gradients, a press proof on the actual stock is the reliable test, and it costs less than a reprint.

What should a buyer ask? The screen ruling and the angle set the printer intends to use, whether the artwork contains regular patterns that could interfere, and whether the proof and colour check was made at final size on the production stock. A printer who answers those three questions is working from a process rather than from habit, and the answer usually prevents the problem before a plate is imaged.

Chengtop prepares files and plates for folding cartons printed by offset and flexo in Wuhan, and checks screen ruling and angle sets against the process before plating. Send the artwork and the substrate, and we will flag the areas where a pattern or a solid tint is likely to interfere.

Leave a message
Phone +86 15272060604
Email chengtop888@outlook.com
WhatsApp WhatsApp: 8615272060604
WeChat +86 15272060604
Back to top

Contact Us

Leave a message