Insert Thickness & Protection: How Much Is Enough?
Too thin = product breaks. Too thick = wasted money. Find the right insert thickness for your product. Chengtop Packaging’s protection guide.
- Understand insert thickness options
- Know how much protection your product needs
- Compare foam density levels
- Learn about edge vs. bottom protection
- Match insert thickness to product value
- Avoid over- or under-protecting
Demander un devis
Indiquez la quantité souhaitée et ajoutez-la à votre liste de devis pour obtenir un devis.
Description
Protection Is a Balance
An insert’s job is simple: hold the product and protect it. But how thick should it be?
Too thin and the product rattles or breaks. Too thick and you’re paying for material you don’t need.
Thickness Options
|
Épaisseur
|
Protection
|
Idéal pour
|
|
3–5mm
|
Light
|
Soft goods, small items
|
|
5–10mm
|
Moyen
|
Cosmetics, electronics
|
|
10–20mm
|
Élevé
|
Glass bottles, fragile items
|
|
20mm+
|
Maximum
|
Luxury, heavy, breakable
|
Foam Density
Not all foam is equal. Density matters:
|
Density
|
Ressentir
|
Protection
|
|
Low density
|
Soft, spongy
|
Light products
|
|
Medium density
|
Firm, supportive
|
Most products
|
|
High density
|
Hard, rigid
|
Heavy/fragile products
|
Higher density = better protection but higher cost.
Protection Zones
Where does the insert need to be thickest?
|
Zone
|
Why
|
|
Bottom
|
Impact from dropping
|
|
Corners
|
Most vulnerable to damage
|
|
Sides
|
Side impact during shipping
|
|
Top
|
Keeps product from bouncing
|
A good insert protects all zones, not just the bottom.
Product Risk Guide
|
Produit
|
Risk Level
|
Insert recommandé
|
|
Clothing, fabric
|
Faible
|
Thin cardboard
|
|
Cosmetics (plastic)
|
Moyen
|
5–8mm foam or cardboard
|
|
Glass bottles
|
Élevé
|
10–15mm foam
|
|
Électronique
|
Élevé
|
15–20mm foam
|
|
Ceramics / art
|
Very high
|
20mm+ custom foam
|
The Cost of Over-Protection
Thicker insert = more material = higher cost.
If your product doesn’t need 20mm foam, you’re wasting money. A 5mm cardboard insert might be enough.
Common Protection Mistakes
- Too thin — Product breaks in shipping
- Too thick — Wasted material cost
- Wrong density — Soft foam for a heavy product
- No corner protection — Corners crush
- Bottom only — Sides aren’t protected
- Not testing — Always drop-test your packaging
Need Protection Advice?
Tell us your product type and shipping method — we’ll recommend the right insert thickness and material.
E-mail: chengtop888@outlook.com
WhatsApp / Téléphone: +86 15272060604
